0
What else can I help you with?
What size torx socket 12 point is required to take head bolts out of a 1991 Toyota Tercel 4 cylinder?
You need a 8MM one.
What is the torx size for head bolts on 1.8 ford diesel?
The torx size for head bolts on a 1.8 Ford diesel engine is typically E8. However, it's always a good idea to consult the specific service manual for your vehicle model, as variations may exist.
What is the correct screw driver head and size for Jeep Liberty tail light assembly bolts?
TORX T-15
What size is the front brake caliper torx head size for a 1999 dodge durango?
Torx #45
What size Torx key or bit bit do you need for a ford 4.0L head bolts?
Torx T-55. A torque angle meter should be used to install them the correct number of degrees on final tightening. These head bolts are TTY (Torque To Yield) and are actually stretched beyond their elastic limit when installed. New head bolts must be used on reassembly or gasket failures are likely.
What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
What type of caliper bolts are use on 2008 Mazda 6 Torx or Alen head orStanderd bolt head or Metric bolt head?
The caliper bolts on a 2008 Mazda 6 typically use a standard hex head (metric) bolt. These bolts are often 12mm in size, but it's essential to verify the specific model and trim, as variations may exist. Torx or Allen head bolts are not standard for this vehicle. Always consult the vehicle's service manual for precise specifications.
Are the 3 bolts that hold on the wheel bearing assembly on a 2002 Chevrolet cav 38s Allen wrench Or is it a torques head if it is a torque head what size would it be?
Its a torx head T55 not an Allen wrench
What size torx key opens 1996 falcon head unit?
torx key t25
What size caliper torx bolts are on a vauxhall corsa 1.7 2002?
The caliper torx bolts on a 2002 Vauxhall Corsa 1.7 typically use T50 torx bolts. It's essential to ensure you have the correct size when working on the brake calipers to avoid stripping the bolts. Always refer to the vehicle's service manual for specific details and torque specifications when servicing brakes.
What size torx bolt on 106 peugot head bolt?
the size is E14
What is the size torx head to remove rear seatbelt in 1997 F150?
I believe it to be a T-55 torx.
