It came standard with DOT-3 but you can use DOT-5 IF you first flush/drain the entire system. Do not mix them.
The brake fluid on a 2003 Avalanche goes into the fluid reservoir. The reservoir should be bolted onto the drivers side of the firewall.
For a 2003 Chevy Tracker, you should use DOT 3 brake fluid, which is a common type suitable for most vehicles. Make sure to check the owner's manual for specific recommendations and ensure that the brake fluid is clean and meets the required specifications. Always avoid mixing different types of brake fluid, as it can compromise braking performance.
On my 03 Chevy Silverado I just added brake fluid and the message turned off.
it says on the master cylinder cap. it should be Dot 3 brake fluid
All Mercedes model cars should only use synthetic DOT4 brake fluid
For a 2003 Ford F-150, you should use DOT 3 brake fluid. It's important to ensure that the brake fluid is clean and meets the manufacturer's specifications to maintain optimal braking performance. Always check the owner's manual for any specific recommendations and guidelines before adding or replacing brake fluid.
It should say right on the cap for the brake fluid. Usually DOT 3. Power steering should say as well, but there are plenty of multi compatible fluids.
You put the brake fluid inside the brake master cylinder
Where is the brake light switch for 2003 hd Chevy truck As far as I know, all brake switches are on the top of the brake pedal arm.
There is no 2003 model. If you mean 1998-2002 model -- the answer is DOT3.
For a 2003 Pontiac Montana, you should use DOT 3 brake fluid. It's important to check the vehicle's owner manual for specific recommendations and to ensure proper maintenance. Always use fresh, sealed brake fluid to avoid moisture contamination.
D O T ( 3 ) brake fluid