Oil Recommendation
SAE 30 40° F and higher (5° C and higher) is good for all purpose use above 40° F, use below 40° F will cause hard starting.
10W-30 0 to 100° F (-18 to 38° C) is better for varying temperature conditions. This grade of oil improves cold weather starting, but may increase oil consumption at 80° F(27° C) or higher.
Synthetic 5W-30 -20 to 120° F (-30 to 40° C)provides the best protection at all temperatures as well as improved starting with less oil consumption.
5W-30 40° F and below (5° C and below) is recommended for winter use, and works best in cold conditions.
Type of oil to use
Use a high quality detergent oil classified "For Service SF, SG, SH, SJ" or higher.
Do not use special additives.
What type of oil does a craftsman riding mower take
For a Craftsman 42-inch riding mower, the engine typically requires about 1.5 to 2 quarts of oil, depending on the specific model and engine type. It's essential to check the owner's manual for the exact oil capacity and recommended oil type. Always ensure the mower is level when checking or changing the oil for an accurate reading.
it takes 20w50 motor oil
A Craftsman riding mower typically requires about 1.5 to 2 quarts of oil, depending on the specific model and engine size. It's always best to consult the owner's manual for the precise oil capacity and specifications for your particular mower. Additionally, using the recommended oil type is essential for optimal performance.
The Craftsman DYS 4500 riding mower typically requires about 2 quarts of oil for its engine. Always check the owner's manual for the specific model to confirm the exact oil capacity and recommended oil type. It's important to ensure the mower is on a level surface when checking or adding oil.
Briggs and Stratton 30W for 4 cycle engines.
The Craftsman 4000 riding mower typically uses a 20 amp fuse. This fuse is part of the electrical system, protecting the mower's components from overloads. It's important to refer to the owner's manual for specific details and to ensure you're using the correct type when replacing it. If you experience electrical issues, checking the fuse is a good first step.
You will need to find out what make the transaxle is. If it is a hydro-gear (which is very common in Craftsman mowers) it take 20W50.
Go to www.searspartsdirect.com, and type in model # 143.033700 That is the engine specified for that mower. You can then choose between engine, carb, starter, etc. diagrams and parts lists.
The transaxle in a Craftsman riding mower with a 26 hp Kohler engine typically uses SAE 30 weight oil for optimal performance. It's important to check the owner's manual for specific recommendations, as some models may require a different type or specification. Additionally, using an oil designed for transmission systems can ensure proper lubrication and longevity. Always follow manufacturer guidelines for best results.
The Craftsman YTS riding lawn mower typically requires a standard spin-on oil filter, often compatible with the Briggs & Stratton or Kohler engines depending on the specific model. It's essential to check the owner's manual for the exact part number or specifications for the correct filter. Commonly used filters include the Briggs & Stratton 696854 or similar models, but confirming with your mower's details is recommended. Always ensure to replace the filter during routine maintenance for optimal engine performance.
Any 2-stroke mower type will serve.