80w
Answeri believe the automatic trans is the E40D, and the 5spd manual is the C6Yes the auto is the E4OD but the manual trans is called a model ZF trans.
T-19a.
( 3 ) according to the owners manual
For a 1986 Ford F-250 with a manual 4-speed transmission, you should use a high-quality gear oil, typically SAE 80W-90 or an equivalent. It's important to check the owner's manual for specific recommendations, as some models may require a different specification. Ensure the fluid is suitable for manual transmissions to ensure optimal performance and longevity.
Motorcraft MERCON ATF ( automatic transmission fluid ) according to the owners manual
should be atf but check owners manual for more information
Motorcraft MERCON automatic transmission fluid ( for the C6 / 4R70W / E4OD automatic transmissions ) - according to the owners manual
The TFT sensor ( Transmission Fluid Temp ) in inside the trans pan. small black sensor in the corner by the dip stick.
Sorry I don't have any specifics for you, but look for the Ford Light Truck Shop Manual for 1986 (eBay has 'em for $30).
auto trans? front pump seal low on fluid will burn up clutches if not fixed.
Mercon 3 or equivalent Mercon 5 would be ok too. Just make sure when you change it that red comes out if so then trans fluid is the replacement oil. Kinda weird huh. Typically manuals hold gear oil??? Leave it to ford to change it all up.
Actually , the 2000 Ford F-250 owners manual shows that Motorcraft MERCON automatic transmission fluid is used in the power steering