For a Mercury Milan, it is generally recommended to use synthetic oil or high-mileage oil that meets the specifications outlined in the owner's manual. Typically, a 5W-20 viscosity oil is suitable for most models. Always check the manufacturer's guidelines for the specific engine type and conditions to ensure optimal performance and longevity. Regular oil changes with the appropriate oil type are essential for maintaining engine health.
The 2010 Milan requires 5W20 Synthetic Blend (Motorcraft preferred or equiv.)
Bottom of the engine on the oil pan.
For a 2008 Mercury Milan, it is recommended to use 5W-20 engine oil. This viscosity grade provides optimal performance for the engine under various temperature conditions. Always check the owner's manual for specific recommendations and ensure the oil meets the necessary specifications for your vehicle.
Drain plug is located on oil pan located on bottom of engine.
4.5 quarts
According to the 2006 Mercury Milan Owner Guide : For the 3.0 litre " Duratec " V6 engine : With engine oil filter change : ( 6.0 US. quarts / 5.7 litres of 5W-20 )
According to the ( 2006 ) Mercury Milan Owner Guide : With engine oil filter change : The 3.0 liter Duratec , V6 engine takes : ( 5.7 liters / 6.0 U.S. quarts of 5W-20 )
5w20 or 5w30 3 and 1/2 qts.
4.5 quarts / 4.25 liters , with engine oil filter change ( according to the Owner Guide )
( 6.0 quarts ) with engine oil filter change , according to the Owner Guide
4.5 quarts ( 4.25 liters ) with engine oil filter change , according to the Owner Guide
There is a clearly labeled cover over the general area of the oil filter behind the cross member on the underside of the car.