0
It really depends on your truck and the type of gearbox you have. Your best bet is to call a dealer and ask them directly. They will ask you a few questions like number of speeds, auto or manual and so on and give you the right info. Putting the wrong fluid in there can cause severe damage to your transmission.
What else can I help you with?
How many gallon of oil does it take to change the oil in a semi truck?
It can vary depending on the size and model of the semi truck, but typically a semi truck oil change requires around 10-15 gallons of oil.
What type of transmission oil for a 1993 Dodge Ram 150 Truck?
Mopar ATF+3 or Mopar ATF+4
Why would a Semi truck have antifreeze in oil?
Cracked injector cups.
What is oil capacity for semi-truck?
11 gallons, give or take.
Where is drain plug on a 1999 Chevy FWD truck?
Oil? bottom of the oil pan Transmission? bottom of the transmission case.
How much oil does a semi truck take?
In the vicinity of 11 gallons is typical.
Where do you fill transmission oil on 2004 Chevy truck?
Where you get your dipstik from
Why does your truck blow blue smoke?
your truck blue smoke when it burns oil, or transmission fluid.
How much oil do I put in a semi truck when the dipstick measures low oil?
If the dipstick on your semi truck indicates low oil, you should typically add oil in small increments, usually around one quart at a time. After adding oil, wait a few minutes and check the dipstick again to ensure you're within the acceptable range. It's important not to overfill the oil; consult your truck's owner manual for the specific oil capacity and type recommended for your engine. Regularly monitoring and maintaining oil levels is crucial for optimal engine performance.
What type of transmission oil for a 1994 Mitsubishi Galant?
You can use API GL-4, SAE 75W90 semi synthetic for your Galant. There are standard types of oil used in these types of cars.
What type transmission fluid for 1994 freightliner?
Knowing the transmission type is much more important than knowing the model of truck. If it's an Eaton Fuller, they recommend 50w synthetic or 70-80w mineral oil.
What kind of transmission oil does a Toyota 42-5fg20 lift truck use?
The Toyota 42-5FG20 lift truck typically uses a Type T-III or T-IV automatic transmission fluid (ATF). It's important to check the owner's manual or consult a Toyota service representative for specific recommendations and to ensure compatibility. Using the correct transmission oil is crucial for optimal performance and longevity of the lift truck's transmission system.
