If you are talking about the engine, then use 10w30 weight any major brand. I recommend synthetic in an air cooled engine. Change the oil once a year if you use synthetic or every 75 hours. If you use conventional oil change it every 50 hours. If you are talking about the pump then you will need to read your owner's manual or contact the manufacture. Most use 30 W non-detergent oil but check to be sure.
Honda K2400HH pressure washer pump how much oil do you need to put back in
Nothing!
Nothing!
30 Weight Non-detergent Oil
The Honda power washer can use any SAE certified two cycle engine motor oil. The motor oil usually is available in one ounce bottles.
A Karcher pressure washer pump requires 15W40 non-detergent oil. It takes 4 ounces and doesn't need to be changed because the oil will last the for the lifetime of the pump.
The troy bilt 2200 Pressure washer uses SAE 30 oil for the Motor,and the pump uses Power washer Pump oil you can buy at Lowes in the section selling parts for your power washer. (special oil treated to keep the seals and the pump running ) The pump oil drain is under the unit ,next to the hose connections for the pump .Use a 5/16 allen wrench to remove the black plug drain out old oil and replace with new oil put in the same amount that was taken out. Look under the power washer and you will see a 3/8 plug for the motor oil,I used a 3/8 ratchet wrench long extension to remove this plug,drain out old oil replace plug. Fill to the the full level on the dip stick.
Some website says 30w non-detergent?
How much pump oil goes into a Troy Bilt Pressure washer Model 020242
Motor oil, trans fluid, gear oil, power steering, washer fluid, coolant, brake fluid, gas..... Please be more specific
It uses a multi viscosity non detergent hydraulic oil. It is ISO 68 lubricant. I would use nothing but Cat oil which you can easily buy.
doe oil from the pieces of montaging, or rubber washer.