0
What else can I help you with?
How wide of a tire can be used on a 2005 jeep wrangler with 4 inch lift?
Width depends on the wheel offset, not the lift height, the lift will allow for about a 33 inch tire, but to get width you will need a different offset and width of wheel as well.
Will and 8 inch wide tire fit on a 4 inch wide wheel?
No, an 8-inch wide tire will not fit properly on a 4-inch wide wheel. Tires are designed to match specific wheel widths for optimal performance and safety. Installing a tire that is too wide for the wheel can lead to issues like improper seating, poor handling, and increased risk of tire failure. It's essential to use tires that are compatible with the wheel width specified by the manufacturer.
What is the height and width of a 7.75x14 tire?
wheel size 7.75 inches wide and 14 inches in diameter. Also see link.
How to read a wheel size correctly?
To read a wheel size correctly, look for the numbers printed on the side of the tire. The first number is the wheel's diameter in inches, and the second number is the width of the tire in millimeters. For example, a wheel size of 17x225 means the wheel is 17 inches in diameter and the tire is 225 millimeters wide.
Can a 10 inch tire fit on a 7 inch rim?
You must know the answer is NO. Not necessarily true, we're talking about width I assume, the section width of the tire 10" in this case is measured at the widest part of the tire. The bead, the part of the tire that sits on the wheel, is significantly narrower. Just as an example P245/55R20, which is a 10" wide tire lists the apporved rim width as 7.0"-9.0", so depending on the exact size it is very possible that your 10" wide tire could go on a 7" wide rim.
What is cross-sectional width of tire?
A tire's section width (aka"cross section width") is the measurement of the tire's width from its inner sidewall to its outer sidewall (excluding any protective ribs, decorations or raised letters) at the widest point. This measurement is made without any load placed upon the tire. The rim the tire is mounted on affects this measurement. On a narrow rim the measurement would be "narrower" than if the same tire was mounted on a wide rim. The industry rule of thumb is that for every 1/2" change in rim width, the tire's section width will correspondingly change by approximately 2/10". For example: a tire in the P205/60R15 size is measured on a 6.0" wide wheel and this size tire has an approved rim width range from 5.5" to 7.5" wide. The tire has a section width of 8.23" (209mm) when mounted on a 6.0" wide wheel. If that tire were mounted on a rim: 5.5" - 8.03" cross section width 7.5" - 8.93" cross section width It's mainly important for (fender, frame)clearances, but a narrow rim should give a softer ride due to sidewall positioning, but less grip due to tread not less flat, more sidewall roll.
How wide is a 285 tire?
A 285 tire typically has a section width of approximately 285 millimeters, which is about 11.2 inches. This width refers to the measurement of the tire's cross-section when mounted and inflated, indicating how wide the tire will be when installed on a vehicle. The actual width can vary slightly depending on the tire's design and manufacturer.
Put 215 65 16 tires on 8''wide wheels?
Max rim width for that size tire is 7.5, some shops may install it but it isn't designed for a wheel that wide.
What is the diameter and width of a tractor-trailer tire and wheel?
inflated, or deflated? what ambient temperature? deflated and at -260 degrees they are about 34" in diamter and 6 inches wide.
What is the width of a 305x70Rx16 tire?
The tread is 305 mm wide
How wide is a 295 tire?
A 295 tire typically has a section width of approximately 295 millimeters, which is about 11.6 inches. This measurement refers to the width of the tire when mounted and inflated. The actual width may vary slightly based on the tire's specific design and the rim width it is mounted on.
How wide of tire will fit on a 6 wheel?
The width of tire that can fit on a 6-inch wheel typically ranges from 175 mm to 225 mm, depending on the specific wheel design and vehicle type. It's essential to consider the manufacturer's recommendations for tire size and ensure that the chosen tire provides adequate clearance for suspension and body components. Always consult a tire professional or refer to the vehicle's specifications for the best fit.
