Troubleshooting Brake Lights: Beyond the Basics
Great work on checking the obvious culprits! It's common for brake light issues to be related to fuses, bulbs, or the brake light switch. Since those have been ruled out, let's explore some less common but potential causes:
1. Ground Connection Issues:
2. Faulty Wiring or Relay:
3. Brake Light Controller (If applicable):
4. Brake Pedal Position Sensor:
5. Anti-Lock Brake System (ABS) Issues:
If you're still unable to resolve the issue, it might be helpful to consult a mechanic (954-566-3625). They have specialized tools and knowledge to diagnose and repair electrical problems in your vehicle.
The light switch.
check the fuse for dash lights
The switch was stuck between high and low beams. Just flick the high/low beam switch once and the circut will be back to normal.
headlight switch
the reverse switch in the transmission
brake light switch bad check for continuity at the fuse then the switch, but yeah bad switch. Kongkit Raggan-Supatanampon
It would help us to know what make, model and year you have.
try the multifunction switch located on the steering column .
The turn signal switch overrides the brake light circuit while the turn signals are on. If the switch is damaged or worn out the brake lights won't work.
check the bulb again, are BOTH filaments good
Very possible ... best to check the wiring with a voltmeter checking for +12vdc.
Have you checked the dimmer? I have a 2000 and there is a wheel to dim the dash lights to the left of the steering wheel, just above the cup holder.