answersLogoWhite

0

faulty master brake system

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

If you experience wet brakes?

Test brakes lightly after driving through deep water.Brakes may pull to one side or may not hold at all.Dry brakes by driving slowly in low gear and applying brakes.


Why does your 2000 infiniti Q45 steering and console shifter shimmy when lightly applying the brakes?

resurface/replace front rotors. probably do the rear rotors too


During normal driving spring brakes are usually held back by what?

During normal driving, spring brakes are typically held back by air pressure in the brake system. This pressure keeps the brake chambers compressed, preventing the springs from engaging the brakes. If the air pressure drops below a certain level, the springs will automatically engage, applying the brakes to prevent the vehicle from moving.


Why do the brakes lock on a lightly loaded truck with a particular brake pressure than a heavier one?

The brakes are designed to handle that truck at the loaded weight - when under that weight, a bit more finesse needs to be used when braking.


What slows the car?

Applying the brakes.


Drivers being tailgated are advised to?

lightly tap your brakes


If you are applying the brakes on your bicycle are you accelerating explain?

Using brakes slows your speed.


How does a solar powered car stop?

brakes, or no sun


How do you stop front brakes from surging?

you press lightly on the brake pedle


When you drive through deep water, you should dry out your brakes by?

Driving slowly in low gear and apply your brakes Lightly.


If you brakes are wet should you dry the brakes by driving slowly in low gear while applying the brakes?

Yes, that will work.


If another vehicle is tailgating you should?

Tap your brakes lightly to warn the vehicle