0
What else can I help you with?
Where is the oil pressure switch in 2006 corolla?
It should be right above your oil filter. It's a grey plastic part with an electrical connector attached to it. Good luck!
Where is the egr solenoid on a Nissan 300zx tt?
should be right in front of the battery. The two hard lines on the plenum and one connecting it to the egr valve. Also there should be a black connector coming off your EFI harness attached to it
How do motorola 2 way radios transmit a signal?
Two way radios should be set at the same frequency. Then, 2 or more persons can communicate with each other via those radios, by pressing buttons and speaking.
Where can one purchase radios for auto racing?
There are different shops, either online or locally that you can visit to purchase such radios. Auto racing is quite a large industry so there should definitely be a large selection of radios for sale.
Do any clock radios have adapters for foreign countries?
Most clock radios don't come with adapter for foreign countries but converted adapters can easily be purchased separately that should work will almost all clock radios.
Can you replace a 2000 Dodge neon 2.0L engine without an EGR valve with one that does have an EGR valve?
I would say yes, in fact the engine you are removing SHOULD have one since it is a 2000, the wiring harness should already have the connector attached.
Which type of connector should be used to connect to an atx motherboard?
20- pin connector
What type of gas connector should be used for a stove?
A flexible gas connector made of stainless steel should be used for a stove.
Should you say Attached are the reports or Attached is the reports?
attached are the reports
While running the PMCS checklist you notice a broken connector on a water hose you should?
replace the connector
2 Way Radios?
Check the range that the 2-way radios can operate in. If longer distances are maintained between the radios, opt for the radios with the highest operating range. Also, you should look for estimated battery life. Make sure that the batteries can last long enough or not require too many changes during your planned activities.
1995 Jeep Cherokee obd 2 connector location?
The 1995 vehicle should be ODB I. The OBD I connector should be under the hood in the engine compartment.
