answersLogoWhite

0

Normally this means the gear synchronizer is worn out or damaged. Usually the damage is caused by shifting without using the clutch.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you change my Vauxhall vectra clutch?

Get A Mechanic Do It


How do I change the clutch on a Vauxhall Astra?

c


Is the clutch plate and release bearing removable with gearbox in situ?

No big job mate. Gearbox to be removed. The last car to change a clutch without moving the gearbox was a Vauxhall Cavalier 1998/99.


Do you have to remove gearbox on vauxhall frontera 2.2 to change clutch?

Yes you do, and it is a heavy one too.


Clutch pedal wont stay down to change gear on vauxhall vectra 1991.1.8?

You have to keep it down with your foot!


R reg vauxhall corsa will not go in to gear when engine is on but will when it's switched off?

release clutch and try again


Vauxhall zafira clutch slip?

my zafira clutch slipps in first gear after pulling away


How do you change clutch on Vauxhall vivaro?

with a good set of tools and 7.5 hours ive done 1 without removing sub frame


Why would you have to push the clutch pedal all the way in and it is still difficult to change gear on Vauxhall Frontera 2.4?

I had same problem so I changed clutch, no diference. found the plate the clutch pedal conects to had pulled away from bulkhead. rewelded to bulkhead and clutch was fine.


How do you fit a clutch slave cylinder on a vauxhall vectra 2.0 16v?

The clutch slave cylinder on a Vectra,is described by Vauxhall as a central release assembly.The release bearing and hydraulic cylinder are a common unit which are replaced together,I don't think any service parts are available.It is secured to the gearbox with 3 bolts and the pressure pipe.Unfortunately you have to remove the whole transmission for access.


How do you fit a clutch slave cylinder on a vauxhall vectra 2.0?

The clutch slave cylinder on a Vectra,is described by Vauxhall as a central release assembly.The release bearing and hydraulic cylinder are a common unit which are replaced together,I don't think any service parts are available.It is secured to the gearbox with 3 bolts and the pressure pipe.Unfortunately you have to remove the whole transmission for access.


How do you adjust the clutch on your vauxhall astra mk4?

hi i have a astra and the clutch seems high but vaxhall said its normal ?