You have to remove the black plastic cover that is in the center of the valve cover. 4 bolts the two you see and if you look at the black box part at the front of the valve cover you will see the other two bolts. Take all 4 bolts out, remove the black plastic cover and you will see the spark plug wires. Good You have to remove the black plastic cover that is in the center of the valve cover. 4 bolts the two you see and if you look at the black box part at the front of the valve cover you will see the other two bolts. Take all 4 bolts out, remove the black plastic cover and you will see the spark plug wires. Good
You have to remove the panel on the valve covers, 4 bolts, and under them are the plugs.
For a tune up on a Lexus LS 400 you will want to purchase spark plugs, wires, a cap and rotor, and new gas and oil filters. You should do an oil change when you do a tune up.
where to locate the factory alarm fuse in my lexus ls 400 1990
If someone who knows what they're doing changed them, it's hard to guess. If someone incompetent changed them, they may have hooked the wires up in the wrong order.
i need to know where the alternator is located on a 1990 Lexus LS400
A 1990 LS400 has 250 horsepower as rated by the factory.
8 spark plugs, 2 distributer cap and rotors, should inspect belts and change them if necessary,[ maybe ]spark plug wires, and air filter, change oil and oil filter..
Bad spark plugs or wires bad fuel injection system bad timing or worst case bent valve.
need a wiring diagram for a 1990 ls 400 need a wiring diagram for a 1990 ls 400
Remove the air intake ducting. Remove the top engine plastic cover. Remove the black plastic covers over the spark plugs & wires. (They're about 2 ft long, grooved, run from front to rear and also cover the distributors & timing belts) Gap new plugs to 1.1mm (0.043 in.)
Answer is No, I just tried having a 92 and 93 ls 400. Plugs are different and dash config is different.
see link