0
What else can I help you with?
How do you hook up fuel lines on a 92 gsx 600 katana?
How to hook up fuel lines to petcock on 98 gsx 600
How do you replace a fuel pump on a 1989 Chevy s-10?
You will need to drop the gas tank, unhook the fuel lines, and replace the old fuel pump with a new one and hook back up the fuel lines.
How do you hook up fuel lines on 1979 Yamaha xs1100 from carbs to gas tank?
fuel line routing on 1979 Yamaha xs1100
How do you hook up fuel lines on a mcculloch chainsaw?
need a diagram for mcculloch eager beaver chain saw
How do you hook up the fuels lines and vacuum lines on 1986 Yamaha FJ1200?
To hook up the fuel lines on a 1986 Yamaha FJ1200, locate the fuel petcock and connect the fuel line from the petcock to the carburetors, ensuring it fits securely to prevent leaks. For the vacuum lines, connect the vacuum hose from the carburetors to the petcock, as this controls fuel flow based on engine vacuum. Be sure to check the service manual for specific routing and any additional connections unique to your model. Lastly, inspect all lines for proper fit and any signs of wear or damage before starting the engine.
Where is fuel pump on 1986 jeep commanche 4.0 liter?
it is located in the tank but you can get to it without dropping the tank. It is located top side..look for the fuel lines...and do you know how to hook up the vacuum lines on that same truck? or can you send me a picture of them?
Name of part on backside of fuel rail it has a vacuum line attached where lines hook up on a 93 jeep grand Cherokee 4.0L six cylinder?
fuel pressure regulator
How do you change fule filter on a 2005 Saturn ion?
the fuel filter is located under the trunk, next to the fuel tank, it just takes the quick release tools to un hook the ends. it has three fuel lines on it.
How do you hook up the fuel lines on a mcculloch silver eagle chain saw?
To hook up the fuel lines on a McCulloch Silver Eagle chainsaw, first identify the two lines: the larger one is typically the fuel supply line, while the smaller one is the return line. Attach the fuel supply line to the carburetor inlet, ensuring it fits snugly. Connect the return line to the appropriate outlet on the carburetor, and ensure there are no kinks or obstructions in either line. Finally, double-check all connections for security before starting the chainsaw.
Where is the fuel filter on an 87 Mazda pickup?
It is located on the passenger side below the carburator.It should be white in color with two fuel lines going to it and is held in place with a metal clip assembly.It sits right over the right side inner fender.Note before you replace the filter the hose hook up the filter may or may not have a arrow on it indicating the flow of fuel being from the tank to the fuel pump.Most new filters have the arrow and if you do hook up the two lines wrong the truck will run out of fuel to the pump and you would simply change the lines to the opposing ends to correct the installation.I would look at the fuel lines and see which fuel line goes to the pump and which line is coming from underneath the cab if you have not done this to avoid any problems.
How do you change the fuel pump on a 1968 Chevy Impala?
take the fuel lines off of the pump and take the 2 bolts out that hold it on and pull it off, to reinstall there is a pushrod inside the engine that rides on the pump arm, you have to push the rod back up out of the way and quickly insert the pump in place and reinstall the 2 bolts and then hook up your fuel lines to the pump and your done.
How do you change a fuel pump on a 1971 Plymouth Fury?
This is very easy. Jack up the front passenger side. Put a jackstand in the correct place. If this is a small block, the fuel pump is under the alternator. There are 2 bolts holding it to the block and 2 lines, 1 going into it, 1 going out. Un hook the lines (One will be rubber, it should be replaced). Then put the new pump in, and hook it all back up in the opposite order. Its pretty straightforward.
