The brake fluid reservor is located at the back of the engine compartment near the firewall. The reservoir has a black cap with wires running into it - take off the cap and lift out the attached float mechanism - then pour in brake fluid up to the proper level.
how change brake fluid . i have ford focus lx 2000.ans how change air filter.
In North America ( DOT 3 brake fluid ) meeting Ford specification ( ESA-M6C25-A )
On a 2001 Ford Focus : The brake fluid reservoir is used for the brake and clutch systems
The kind in a can.
DOT ( 3 ) brake fluid
According to the 2000 Ford Expedition Owner Guide : ( DOT 3 brake fluid ) meeting Ford specification ( ESA-M6C25-A )
In a 2000 Ford Windstar : ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A ) according to the Owner Guide
by unscrewing it.
DOT ( 3 ) brake fluid meeting Ford specification ( ESA-M6C25-A )
To put brake fluid in a Ford Focus, you need to locate the master cylinder, which should be on the drivers side under the hood. On this , you'll find the brake fluid reservoir. You unscrew the cap and replenish using the right brake fluid, and screw the cap back on.
i think this could be the brake fluid level is low. thas what it is in my BMW
how much trans fluid do i add when changing trans fliud in my 2000 focus