answersLogoWhite

0

What else can I help you with?

Related Questions

How do you top up the power steering fluid in a fiat punto?

fiat punto's dont have steering fluid. they have electric motors instead.


Where do you refill your powersteering fluid on a fiat punto 1999?

It Is On the driver side (under bonnet) right at the back of the engine next to the brake fluid.


What does the warning light on your fiat punto mean that looks like a brake fluid bottle?

This warning light means that you need to add brake fluid to your car. Improper fluid levels can cause brake malfunction resulting in an accident.


Where do you put the clutch fluid in a fiat punto 96?

MK1 Punto's do not have clutch fluid... Unlike BMWs, Punto's clutch is controlled via cable...


Does a 2006 fiat punto have front brake pads?

Yes, a Fiat Punto has disc brakes at the front and these have pads. The drum brakes at the back have shoes.


What are the timing marks on a fiat punto active sport 2003?

The timing mark on a Fiat Punto Active Sport 2003 is through the hole of the bell housing. The bell housing is under the area of the battery of the vehicle.


What is the corrrct brake fluid for my 2003 fiat punto sporting 1.2 16v?

To have best results use genuine fiat lubricant (TUTELA TOP 4) SAE J 1703, ISO 4925, FIAT9.55597.


Where do you refill the power steering in a Fiat Punto 2001?

I think the Punto has electric power steering, so no fluid.


How do you adjust rear brake drums on 1995 fiat punto?

what are the pins for on a wheel drum?


When was Fiat Punto created?

Fiat Punto was created in 1993.


The Fiat Punto is manufactured by who?

The Fiat Punto is manufactured by the company Fiat. Fiat is an Italian manufacturing company. The manufacturing of the Fiat Punto started in 1993 and is still currently being produced.


What is the sequence for bleeding brakes on a fiat punto?

To bleed the brakes on a Fiat Punto, start with the brake furthest from the master cylinder, which is typically the rear passenger side, followed by the rear driver side, then the front passenger side, and finally the front driver side. Use a brake bleeder kit or a helper to pump the brake pedal while you open and close the bleeder valve on each caliper to release air. Ensure the brake fluid reservoir is kept filled to prevent introducing more air into the system. After bleeding, check the brake fluid level and top off as necessary.