answersLogoWhite

0

the clutch cable attaches to the small pulley on left front of tractor mowing deck . there is a flat washer first than the cable than a locking pin to hold it hope this helps

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What does the clutch center plate with spring hub do?

The clutch centre plate with spring hub help in holding the spring leaf spring in place in a vehicle.


How do you change the clutch spring on a Murray riding lawn mower?

how to install a spring clutch on a murray mower


Why does the clutch pedal on a 1998 cavalier not spring back?

the return spring on the clutch pedal assembly must be replaced.


What is the Spring in the clutch and the brake used for?

For the brake it's pretty obvious. You don't want the brake to stay on when you aren't braking, so you need the spring to push it back. For the clutch it's the same but in reverse. You want the clutch to stay on, except for when you're depressing the lever. The spring keeps the clutch on, until you use the lever to overcome the spring. Then when you release the lever the spring kicks in again, engaging the clutch.


Where does the belt tensioner spring fasten for 42 craftsman?

For the Craftsman 42-inch lawn tractor, the belt tensioner spring typically fastens to the frame of the mower, often on a designated bracket or hole near the engine. The other end of the spring connects to the tensioner arm, which helps maintain proper tension on the mower deck belt. It's important to consult the specific model's manual for exact attachment points, as they may vary slightly between different models.


What is a clutch springs?

A spring is used to hold together the clutch and the flywheel.


What is the disadvantage of diaphragm clutch?

Diaphragm spring clutch are less in weight


What are 3 advantages of a diaphragm spring type clutch compared to a multicoil spring clutch?

diaphragam clutch is small in size as compare to spring clutch and it transmits more torque as diaphragm exerts more force as copare to springs...... therefore it is advantageous to use diaphragm...


Clutch spring 240sx?

Adjustments is behind top of the clutch pedal. Clutch spring should be under the car on the transmission closest to the motor block, next to the slave cylinder.


How does an electric PTO clutch work on a craftsman riding mower?

The electric PTO Clutch is Electromagnetic. There is a stator which creates a magnetic field when voltage is applied and this causes the free spun pulley to lock into place with the crankshaft of the engine. When voltage is release, spring pressure forces the pulley away from the stator. This is over simplified but that is about it.


1995 escort clutch?

The 1995 Escort clutch has a single dry plate diaphragm spring type clutch. The clutch plate has a splined hub which allows it to slide along the splines on the input shaft. The clutch and pressure plate are held in contact by spring pressure exerted by the diaphragm spring in the pressure plate. During shifting when the clutch pedal is depressed, which transmits hydraulic pressure from the master cylinder to the release cylinder, pushing on the release lever so the throwout bearing pushes on the diaphragm spring fingers, disengaging the clutch.


How is contact between drive and driven members of a clutch maintained?

clutch pedal over -centre spring pressure