In the Almera Tino, water from the sunroof drain holes typically exits beneath the vehicle, often near the wheel wells or under the front fenders. These drain holes are designed to channel excess water away from the sunroof area to prevent leaks into the cabin. If the drains become clogged, water may overflow and leak into the interior instead. Regular maintenance can help ensure these drains function properly.
Drain holes on a sunroof are typically located at the corners of the sunroof frame. They allow rainwater or water from car washes to drain away from the sunroof assembly and prevent leaks into the vehicle. These drains usually lead down through the pillars of the car and exit under the vehicle. It's important to keep these drain holes clear to avoid water buildup and potential leaks.
On a 1996 Monte Carlo, the sunroof drain holes are typically located at the corners of the sunroof frame. These drains are designed to channel water away from the sunroof area and into the vehicle's body. To access them, you may need to remove the sunroof trim or headliner. It's important to keep these drains clear to prevent water leaks inside the vehicle.
Make sure drain tubes are clear so water can run out
In your sunroof there should be 1 hole in each corner. These holes act as drains for the sunroof. Every sunroof leaks, the drains let the water drop out of the vehicle at the bottom on the underside. Your drain holes are probably just plug up, maybe with leaves or something. Grab an air compressor and a hose and just blow the blockage out.
Our sunroof leaks after any heavy rain or carwash due to plugging in the sunroof drain holes. From what our service dept. claims, the sunroof does not form a perfectly water tight seal with the roof by design. There are actually tiny drain holes around the perimeter that allow any seepage to drain down through the windshield columns and out near the front tires. It should work unless debris is now plugging those drains.
I found the answer here: http://www.mazdaforum.com/forum/mazda-mx-3-mazda-mx-6-25/water-leak-17642/
The sunroof drain on a Mercury Mountaineer is typically located in the corners of the sunroof frame. These drains channel water away from the sunroof area and into the vehicle's body, preventing leaks. You can access them from the interior by removing the headliner or through the exterior near the sunroof. It's important to keep these drains clear to avoid water accumulation and potential leaks.
The drain locations for a Lexus RX330 typically include the sunroof drain tubes, which are located at the corners of the sunroof opening, and the cabin air filter housing, where moisture can accumulate. Additionally, there may be drain holes in the engine bay and under the vehicle for excess water. It's important to regularly check and clear these drains to prevent water buildup and potential damage. Always consult the vehicle's service manual for specific locations and maintenance procedures.
If it has a sunroof, check the drain tubes for the sunroof. They plug up and the water gets in the car.
The drain holes on a 2004 Chrysler Sebring sedan are typically located in areas such as the sunroof, door panels, and the windshield cowl to allow water to escape and prevent flooding inside the vehicle. It's important to keep these holes clear of debris to ensure proper drainage and avoid water-related issues, such as mold or electrical problems. Regular maintenance can help keep the drain holes functioning effectively. If you notice water pooling inside the car, it may indicate a blockage that needs to be addressed.
The drain for a 745 sunroof is typically located in the corners of the sunroof assembly. These drains channel water away from the sunroof area to prevent leaks inside the vehicle. It's essential to ensure these drains are clear and functioning properly to avoid water buildup. Regular maintenance can help prevent any issues related to sunroof drainage.
the sunroof shouldnt have a drain.it would leak in your vehicle if it had a plug to pull.wind should take care of rain water