under the hood.
^^^^
gee... thanks.
picture of engine for a 1999 ford escort zx2. Looking at the engine block in the vehicle, the camshaft position sensor is located on the upper right of the block held in by one bolt and has a two wire weather-proof connector attached.
At the bottom of the firewall on the passenger side.
oil filter is located on the engine block under the car. drain plug is located on the oil pan.
yes
NO! The 1999 Ford Escort 2.0 liter is not an Interferance engine. Replace the belt at 120,000 miles.NO! The 1999 Ford Escort 2.0 liter is not an Interferance engine. Replace the belt at 120,000 miles.
The starter on a 1999 ZX2 with the 2 liter DOHC engine is tucked up behind the intake manifold, bolted to the transmission bellhousing. Look for it at the junction of the engine block and the transmission.
The 3.8 has two The are also the engine block drain plugs ad screw into the bottom of the block beside the oil pan but slightly higher, one on either side of the engine.
Doesnt have one, you have to remove the bottom hose to drain coolant.
go to halfords, buy engine degreaser, (that u add to oil to clean engine.... then follow instructions, an drain oil from sump plug located underneath engine, and then replace with new oil, and also...
The engine diagram for the 1999 Ford Escort ZX2 can be found in the owner's manual for the car. You can also find the engine diagram online at Owner.Ford.Com or on the Do It Yourself website.
Yes as long as they are both the same type of Escort such as LX or Zx2.
It's bolted to the engine.