On a 455 Oldsmobile distributor, the number one spark plug wire is typically located at the 5 o'clock position when viewing the distributor from the driver's side of the engine. The rotor will point towards the number one cylinder, which is usually the front cylinder on the driver's side. Make sure to confirm the firing order and verify the cylinder layout for accuracy during installation.
no comment i just need the answer where is the number one spark plug on the 307 distributor cap
The distributor cap is located where the spark plugs cables are connected .They go from the motor to the distributor cap.
4.3? Follow the spark plug wires from the spark plugs, they will lead you right to the distributor.
It is in the very back of the engine. Just follow the spark plug wires from the spark plugs and they will go to the top of the Distributor. That will be the distributor cap that the wires are in.
The number 1 cylinder is located at the front left of the engine block while FACING the engine. Follow the spark plug wire to the distributor a POW there it is.
Bad coil wire, bad coil, etc...
It uses the Opti-Spark distributor which is flat, its located between the water pump and engine block.
It is located where all the spark plug wires attached to the spark plugs go to it.
It is located over the cylinder head.
The distributor cap is located on the top of the distributor on a 1996 Sunfire. It is connected to the spark plugs via a wire.
You will have no spark from the distributor.You will have no spark from the distributor.
On a 1600 cc VW engine, the number 1 spark wire on the distributor is connected to the terminal that corresponds to the cylinder closest to the front of the vehicle, which is the driver's side. The firing order for a VW engine is 1-4-3-2, so the number 1 cylinder is located at the front left when facing the engine. Ensure that the distributor is set to the correct timing position before connecting the spark wires.