0
What else can I help you with?
What happens if you forget to put the bolt back on after you change your oil?
What bolt? If you mean the old drain plug , it will be self evident! Big mess on the ground and seized engine. There is no "bolt" to remove when you change your oil, only the oil drain plug.
How do you do an oil change?
you purchase the oil and a filter, then locate the oil pan and remove the drainplug bolt, after the oil has drained you change the oil filter, replace the drainplug and add oil
How do you change gear oil in a 1998 dodge 1500 truck?
You take off the bolt at rear of oil pan and drain it. Then replace bolt and change oil filter on side of engine, then fill engine with required amount of new oil.
How do you change oil on 1998 Honda xr 400?
there should be a big bolt near your clutch, undo that bolt (oil will come out) close it and fill up your oil
How do you change oil in 2002 Honda xr200r?
there should be a bolt near the bottom of the engine, simply remove bolt and drain oil into pan. put bolt back in and fill with motorcycle oil that meets specifications to Honda
How do i change oil in Oldsmobile 1993 cutlass ciera?
under the front of the car you'll see something that looks like a black tube it has a bolt on the back of it undo the bolt oil will drain out change the oil filter witch is by the belt on the motor it hard to get to but you can do it chang the filter bit the bolt back in and replace oil done
How do you change oil on a IH 424 diesel tractor?
take out bolt on the bottom of the oil pan let the oil drain out. when oil is finished draining re-install bolt back into the oil pan change the filter which is on the right (passenger) side it is in a housing that look kind of like an oil filter then fill it back up with oil
How do you do an oil change on a 2000 kx80?
Under neath the bike there is one bolt and unscrew the bolt then the oil will spill out make shore all the oil is out then screw the bolt back on but not to tite then there will be a black cap that sees oil unscrew that and put the fresh oil in and screw the black cap on snug tite
How do you change the oil and filter on a 2007 Passat 3.6 l engine?
To change the oil on a 2007 Passat 3.6 liter engine first safely raise the vehicle and drain all the oil from the oil pan by removing the drain bolt. Install the drain bolt, and remove the oil filter. Replace the filter and oil. Then lower the vehicle.
How do you change the oil pump on a 94 Accord LX?
you unbolt it and bolt the new one on
Why is my car leaking oil after an oil change and how do I fix it Are additives a good idea?
either the thread on oil pan bolt is stripped or the washer on bolt needs replacing. easy fixonly oil additive i would recomend for any engine is LUCAS ENGINE OIL ADDITIVE
How do you change the oil in a2001 suzuki katana 600 cc?
remove the oil filter. let it drain .Then remove the oil drain bolt at the bottom of oil pan and drain it. Put a new filter on and tighten it. Then tighten the drain bolt and fill to level with new oil.
