On any car or engine, you can always start at the fuel injector or carbourator and follow the line leading to it backwards till you find any part of the fuel system your looking for, including modified ones. This should only take a few minutes and has the advantage of exposing any other things (like pressure regulators, etc) also in the system that may have caused a problem. Uh...this also works from the gas tank and following it forward...or anywhere along the system you want to start! True, if it's in the fuel tank, (generally more true for fuel pumps than filters), you'll end up, by elimination, isolating it to having to be there. Generally accessed by a removable panel somewhere on it, and frequently hidden under the rear seat. FUEL FILTER LOCATION Ford Two locations R/R next to tire or around the fuel tank. Follow the lines from the fuel tank, some are hidden behind a small metal plate with a hose clamp around it but you can find them if you follow the fuel lines from tank up the left or right side of the frame rails. Hope that helps.
2004 ford escape
Purchase a Puroilator Filter. It comes with complete instructions.
5.5 Q or 5.2L with filter change
The 2004 Ford Escape has 16 valves.
Where is the location of the oil filter on a 2003 Ford Escape.
The coolant temperature sensor in a 2004 Ford Escape V6 is located near the front of the motor. It is down low near the water pump and in front of the oil filter.
According to the 2004 Ford Escape Owner Guide : With engine oil filter change : The V6 engine takes ( 5.2 liters / 5.5 quarts of engine oil )
The 2004 Ford Escape is a gas-powered vehicle.
The 2004 Ford Escape has a 5-speed manual.
where are the oxygen sensors on a 2004 ford escape with a 3.0 engine
The height of the 2004 Ford Escape is 5 ft. 9.1 in. (69.1 in.).
The 2004 Ford Escape's turning circle is 35.4 ft..