answersLogoWhite

0

It is located underneath the car, secured to the power plant frame (large channel connecting the end of the transmission to the differential).

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

In a(n) fuel oil supply system one pipe is the supply and the other acts as the return.?

In a(n) ____________________ fuel oil supply system, one pipe is the supply and the other acts as the return.


How filling fuel a airplane while flying?

There will be a refueling plane which contains only fuel. A long hose or pipe will be lowered from the refueling plane. A plane which is to be refueled will have a hole which goes to fuel tank. The pipe will be injected into the hole. The fuel will flow through the pipe. The plane gets refueled.Then the pipe or hose is drawn back.


What is on or off with a fuel lever in a lawn mower?

The fuel supply is 'on' or 'off' with that lever. Turning the lever at 90 degrees to the pipe, switches fuel flow off.


When accelerating my 1986 302 F250 stalls. Why?

Fuel flow! either blockage in fuel pipe or float level in carb set incorrectly.


What is flow line of a pipe?

The flow-line of a pipe is the bottom inside portion of the pipe. Flow-lines are generally reffered to when establishing the elevation of the pipe work.


What is the flow line of a pipe?

The flow-line of a pipe is the bottom inside portion of the pipe. Flow-lines are generally reffered to when establishing the elevation of the pipe work.


Does overflow of fuel in the carburetor cause the engine not to start?

Yes. to solve the problem strangle the fuel pipe to cut flow of fuel and persistently start the engine it should solve the problem.


What is the pipe flow formula used to calculate the flow rate of a fluid through a pipe?

The pipe flow formula used to calculate the flow rate of a fluid through a pipe is Q A V, where Q is the flow rate, A is the cross-sectional area of the pipe, and V is the velocity of the fluid.


Can you liquid flow through a pipe?

of course liquid can flow through a pipe?


What parts need to be removed when changing a knock sensor for a 1997 Mazda millenia-2.5?

air intake hose,accelorator cable,fuel pipes ,pipe,harness,egr valve,intake manifold,bypass pipe,water pipe,and knock senser


What is the flow-line of a pipe?

The flow-line of a pipe is the bottom inside portion of the pipe. Flow-lines are generally reffered to when establishing the elevation of the pipe work.


How can you determine if the fuel pump is out?

1)Look for your fuel line after the fuel pump(usually in the tank or close to it) 2)Loosen the clamp on the line. 3)Remove fuel pipe 4)Turn on your ignition - fuel should flow with some pressure. (Remember to consider safety - no lights, fire and face open fuel pipe away from meltable objects and yourself)