The PCV (Positive Crankcase Ventilation) valve on a 2006 Toyota Tacoma is typically located on the valve cover or near the intake manifold. To find it, look for a small, round or oval-shaped valve connected to a rubber hose. It's usually positioned on the driver's side of the engine. You may need to remove some components for easier access, depending on your specific engine configuration.
http://www.4x4wire.com/toyota/maintenance/tacoma_4runner_30k/maintenancep5.html Link explains where PCV valve is, how to test it !!!!
On a 2001 Toyota Tacoma, the PCV (Positive Crankcase Ventilation) valve is typically located on the valve cover. You can find it on the driver's side, near the back of the engine. It may be secured by a rubber grommet or a small clamp, and it connects to a hose that leads to the intake manifold.
In the back valve cover on the passenger side.
It is on the top of the rear valve cover.
The PCV valve on a 2006 Chevy Trailblazer is located on the top, left side of the engine. It allows gases which are built up in the engine to be recirculated.
The PCV valve is located in the valve cover
Putting a PCV valve on a Toyota Tacoma is pretty easy. Just pull on the old PCV valve straight out of the rubber grommet once itÕs out twist the hose off the other end and replace it with a new one.
The PCV valve on a 2006 Toyota Sienna is located along the side of the top of the engine. It allows gases which are built up in the engine to be removed and recycled.
the pcv valve is located on top of the valve cover
does the 2006 silverado have a pcv valve
The PCV valve is located on top of the valve cover in the middle.
The PCV valve is located inline in a hose between the valve cover and throttle body. Make sure to check the hose and replace if cracks are found.