0
What else can I help you with?
Where is the drain plug on a Honda lawnmower?
There is none you suck the oil out with a pump provided by the dealer.
How do you change the oil in a lawnmower?
With the engine off and the plug wire off the spark plug, you will need to remove the drain plug on the bottom of the engine. Drain the oil, install the plug and fill with 30w oil.
What can be used to seal the oil drain plug in a lawnmower?
A bit of teflon tape can work wonders.
What is a antique yardman lawnmower worth?
Model 100902. Type 0134. Core 6508181 . Sit down yard-man. Lawnmower
Where is the oil drain on a craftsmen self propelled lawnmower?
under the mower above the blade should be a allenhead plug
What if you overfill with oil your lawnmower?
drain it.
How do you change the oil in a craftsman 6.75hp lawnmower?
Depending on the model of the Craftsman lawnmower, there is either an oil plug underneath the deck of the mower which needs removed to drain the oil or the lawnmower needs tipped on it's side to allow the oil to drain out through the oil cap area. Once oil has drained you will want to refill the oil until the dipstick registers "full".
How do you change the oil on a Countax ride on lawnmower vanguard motor without removing it from the chassis?
there should be a square plug on the base of the motor or a tube that connects to the base of the motor with a plug at the end. remove the plug and the oil will drain
Where is the oil drain plug in a Troy-Bilt lawnmower?
If it is a walkbehind, use the dipstick tube tilted downward and an appropriate container. If it is a rider look on the right side of the machine.
Will putting a car spark plug in your lawnmower hurt it?
You may do serious damage to the lawnmower if the wrong spark plug is installed.
How do you empty the oil on the Briggs and stratton 4.5 hp lawnmower to refill it?
there should be a drain plug under the mower where the blades are. to fill it is on the top where you check the oil. there is a drain plug under the mower where the blade is. to fill it is where you chech your oil. Many mowers do not have a drain plug, simply remove the dipstick and tip the mower on its side and dump it out the filler tube into a proper container.
How do you change oil in a Craftsman 625 series lawnmower?
The oil drain plug for the Craftsman 625 series lawnmower is located on the bottom of the mower, just above the blade. Tip the mower back. The plug is round and threaded with a square head. Using the square head of a ratchet extension, twist the plug counterclockwise and remove. The oil will start draining. Once it has drained, replace the plug and tighten clockwise until snug. Replace with new lawnmower oil or SAE-30 weight oil.
