0
What else can I help you with?
Where is the EGR valve located on a 1996 Ford Ranger 2.3?
egr valve location on a 1997 ford ranger 23l
Where is egr valve on 1999 Ford Ranger 4.0?
On your 1999 Ford Ranger , 4.0 liter EFI , V6 engine : I believe the EGR valve is just to the left of your engine oil dipstick ( when you look into the engine compartment from the drivers side ) The EGR valve is lower down and has a round shaped top
Does the 2003 ford ranger edge 4.0 liter have an egr valve?
Yes, it does have an EGR valve.
Where is the egr valve ford ranger 3.0?
Under the hood
Do all 1994 Ford Ranger 40 have an EGR Valve?
yes 2002 and later 30L are the only ones not equipped with an egr valve
What does Error Code P1401 mean on a 1999 Ford Ranger?
Error Code P1401 on a 1999 Ford Ranger indicates a problem with the EGR (Exhaust Gas Recirculation) system, specifically that the EGR valve is not functioning correctly or is not receiving the proper signals. This can be due to issues such as a clogged EGR valve, a faulty EGR position sensor, or vacuum leaks. Addressing this code usually involves inspecting and cleaning the EGR system components or replacing faulty parts to ensure proper operation and reduce emissions.
Does a 1993 ford ranger have a egr valve?
Yes, a 1993 Ford Ranger is equipped with an EGR (Exhaust Gas Recirculation) valve, as it was a common emission control component in vehicles of that era. The EGR valve helps reduce nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the engine's intake. However, whether a specific Ranger has an EGR valve can depend on the engine type and specific emissions regulations for that model year.
Where is the EGR Valve on your 1992 Ford Ranger with a 2.9 engine?
At the back of the passenger side on the engine.
Where is the EGR valve on a 1987 Ford Ranger located?
On newer vehicals the egr valve is located on ignition emissions system and on the older vehicals it is located on the intake manifold..
How do i remove the egr valve on a 1999 ford ranger 3.o v6 flexfuel engine?
To remove the EGR valve on a 1999 Ford Ranger 3.0 V6 Flex Fuel engine, first disconnect the negative battery terminal to ensure safety. Then, locate the EGR valve, which is typically mounted on the intake manifold, and remove any electrical connectors and vacuum hoses attached to it. Unscrew the mounting bolts using the appropriate socket size and carefully lift the valve off. Clean the mounting surface before installing a new valve or reassembling any components.
What is the metal hose that comes off the egr valve to the manifold called on a 87 ford ranger called?
It's called the EGR tube.
High nox on 1993 Ford Ranger 4.0?
check egr system,make sure vacuum reaches egr valve when is supposed to
