on the oil pan. hope this helps.
where is the air conditioner drain on a 2001 Mitsubishi Galant
To install a freeze plug on a 2003 Mitsubishi Galant, first drain the engine coolant and clean the area around the freeze plug hole. Apply a thin layer of sealant to the edges of the new freeze plug, then use a socket or a similar tool to tap it gently into place, ensuring it sits flush with the engine block. Finally, refill the coolant and check for leaks before starting the engine.
There is a drain valve at the bottom of the radiator and you will have to remove the drain bolt in the engine block.
It takes a 15mm wrench.
The transmission drain plug on a 2003 Mitsubishi Galant is located on the front of the transmission, near the bottom. It allows the fluid to be easily removed during maintenance.
I believe that the airconditioner condensation drain is plugged. How do I clear it?
Under Dash by Gas Pedal.
Doubtful. Crawl under the car and look see.
If you mean drain holes for coolant... There is one located at bottom of the radiator. And two more on each side of the engine block.
Oil - rear or side of oil pan Radiator - bottom or rear of radiator
Open the drain valve on the side of the engine block.
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.