Ford Motor Company
FUEL PUMP SHUT-OFF SWITCH
After a collision, if the engine cranks but does not start, the fuel pump
shut-off switch may have been activated. The "Fuel Reset" indicator light
will illuminate in the instrument cluster. The shut-off switch is a device
intended to stop the electric fuel pump when your vehicle has been
involved in a substantial jolt.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.
5. Make a further check for leaks in the fuel system.
Roadside emergencies
The fuel pump shut-off switch is
located in the passenger's foot well,
behind the kick panel.
No, Dodge does not use inertia/reset switches.
Gm vehicles do not use ineria/reset switches.
Chrysler/Plymouth/Dodge vehicles do not use inertia/reset switches.
GM vehicles are not equipped with an inertia switch.
weak fuel pump.
To reset the fuel shut-off switch in a 1992 Mercury Topaz, locate the switch, which is typically found in the trunk or near the fuel tank. Check for a small button on the switch; if it has popped out, press it back in to reset. Ensure that the vehicle is off while doing this. If the switch continues to trip, it may indicate a more significant issue that needs further investigation.
It should be either in the trunk or the passenger or driver floorboard. To reset ot, push the button back down.
Bad switch?
92 f150 fuel shut off switch located
It does not have one.
I have a 92 Le Sabre and I've never seen a reset switch !
i hardwired my fuel pump so tada flip a switch and fuel pump is on