answersLogoWhite

0

FUEL PUMP SHUT-OFF SWITCH After a collision, if the engine cranks but does not start, the fuel pump shut-off switch may have been activated. The "Fuel Reset" indicator light will illuminate in the instrument cluster. The shut-off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in the reset button. 4. Turn the ignition to the ON position. Pause for a few seconds and return the key to the OFF position. 5. Make a further check for leaks in the fuel system. Roadside emergencies The fuel pump shut-off switch is located in the passenger's foot well, behind the kick panel.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Where is the fuel safety switch located on a infinity qx4?

There is no inertia fuel pump safety switch in a 1997 Infinity qx4 3.3L 6 cylinder engine.


Chevy van fuel pump safety switch. where is it located at?

GM vehicles do not have a fuel shut off inertia switch


Where is the fuel pump safety switch located on a 1986 Trans Am?

There is not one.


Where is fuel safety switch located on a 2003 Honda Accord?

There is none.


Where is the fuel safety switch located on a 1994 Mazda mx-6?

The fuel safety switch in a 1994 Mazda MX6 is located on the inside of the fuel tank. This is very tricky to locate, so it would be better to leave it up to the professionals toÊmaintain.


Where is the fuel safety switch located on a 1993 GMC Vandura Van?

There is not one.


Does a 2000 Hyundai Sonata have a fuel pump safety switch - If so where is its location?

The 2000 Hyundai Sonata does have a fuel pump safety switch. The fuel pump safety switch is located in the fuse box. The fuse box can be found in the engine compartment behind the battery box.


Where is the fuel pump safety switch located on a 2002 ford escape?

under the wheel


Does a 1995 Chev S10 blazer have a fuel pressure safety switch If it does where is it located and how can you reset it?

it does not have a safety switch you can reset. If the ecm (engine control module) detects no rpms it shuts down the fuel pump.


Where is the fuel safety switch located on a 2000 dodge ram van 1500?

Dodge doesn't use fuel safety/inertia switches. The fuel system is computer controlled with relays.


Where is the fuel safety cut off relay located on 98 s10?

The 98 S10 does not have a safety cut off (inertia switch).


Where is the fuel pump inertia safety switch located in a 1986 econoline?

In the passengers side kick panel.

Trending Questions
84 CJ7 258 inline 6 will not start. It turns and fires with starter fluid but will not stay on. Checked fuel filter and pump and they work okay. Ideas? What are symptoms of bad sway bar links? What number in the vin number tells you the gear ratio? 2005 Chrysler Pacifica running fine this morning but when I tried to crank it this afternoon it made this clicking noise. All the lights across the dash light up? What is the 2000 Chevy S-10 2.2L Firing Order for coil pack? How do you replace tensioner on mbz 2.6? When bleeding power steering pump does the cap have to be off or on? Why does your car feel as though the brakes are grabbing when you slow down? How many teeths have 3255 crown and pinion? I have Denso alternator with 4 terminals IG L S and FR .I believe the ig is ignition L lights s Battery. what is the FR terminal does it need to be connected? What is 2004 Chrysler check engine code P0320? What would cause muffler to get red hot on john deere lx173? How do I change the spark plug in my Honda 400 XR? Can the fuel gauge on a 2001 Dodge Dakota be adjusted? How do you change the oil pump in a 1988 Mitsubishi Starion Is the oil pump internal or external Can a do it yourselfer fix it or does it need to go into the shop? What store sells cheap headlights? Can you run synthetic diesel oil in a gas engine? Which drivetrain component links the transfer case to the front and rear differential On a HMMWV? You replaced your rotor on the front driver side of your 1990 F250 but your brake peddle goes all the way to the floor you have tried bleeding them in the front but no change what else can you do? Do you check the radiator liquid when the cars on?