There are 2 fuse boxes behind the glove box and 1 fuse box is behind the first the front one swivels down also there is a big fuse under the drivers seat a right pain to get to if it's a 2 battery type you have to take seat out take battery out then fuse cover
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
Unscrew the light from inside the van and remove the light from the outside
Brake light switch is broken or needs adjustment.
The 2011 Ford Transit-Connect has 16 valves.
To reset the brake pad light on a 2009 Ford Transit, first ensure that the brake pads are in good condition and properly installed. Then, turn the ignition to the "On" position without starting the engine. Press the brake pedal several times, which may reset the light. If the light remains on, you may need to disconnect the battery for a few minutes or consult a professional for further assistance.
The 2011 Ford Transit-Connect has a 4-speed automatic.
The 2011 Ford Transit-Connect has an inline 4 engine.
The 2011 Ford Transit-Connect is a gas-powered vehicle.
wiring harness to roof brake light has been fried. Brake lights don't work, cruise control doesn't work, unable to move shifter from park. Transit Connect 2010
The 2011 Ford Transit-Connect runs on regular unleaded.
The maximum payload of the 2011 Ford Transit-Connect is 1600 lbs..