in the fuse box
yes but the speedometer might not work depending if it is a mechanical or electrical gauge. the trucks are electric and i believe the speedometer is mechanical in the caprice but the parts are interchangeable for the gauge
the bottom right side The oil pressure sending unit that makes either the light or gauge work is located behind the distributor.
The dealer has to program it.
ect sensor bad
The fuse box for the fuel gauge on 1998 Chevy blazer is located on the driver side. It is near the hook latch.
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
This is an electrical problem that happens with a lot of Caprice classics with digital spedometers. My speedometer works about 1 day out of the month and the will cut off the other 30 days.
in the fuel tank
In the fuel tank. Fuel filter is inside the frame rail on the driver side just in front of the rear wheels. Fuel pump/gauge sender wire connections are underneath the driverside rear just behind the bumper.
1990 Chevrolet Lumina temperature sender is located on the back side of the thermostat housing. The sender has a wire that goes to the temperature gauge.
On the 2008 Chevy Silverado, the ECT (Engine Coolant Temperature) gauge is located on the instrument cluster, which is directly in front of the driver. It is typically part of the gauge array that includes the speedometer and other critical indicators. The ECT gauge displays the temperature of the engine coolant, helping the driver monitor engine health. If the gauge shows abnormal readings, it may indicate a cooling system issue.
You do NOT reset an oil pressure switch. It has to be replaced and a special socket is required. Before doing so you will need to have an external mechanical gauge installed to be sure that you do have pressure.