Drivers side foot panel. Just above the panel. Shouldnt need to remove the panel to get to the fuses.
To remove the front door panel on a 1993 4Runner unscrew and pull off the mounting hardware, including the clips. The door panel will need just need to be pulled off.
If your truck is a 4x4, then that's is were the fuse for 4x4 goes. IT MEANS (4- WHEEL DRIVE)
where is the fuse box for a 89 Toyota 4 runner
To remove the door panel on a 2003 Toyota 4 Runner, locate the screws holding the panel to the door. Unscrew these and lift the panel up and away from the door.
Fuse box diagram for a 1995 Toyota four runner
The 1992 Toyota 4-Runner does not have a separate fuse for the clock. There are, however, two fuses that control the radio and clock. At slots 18 and 19 in the fuse box, there is a mirror/radio fuse and a radio fuse.
As you face the front of the 4Runner, you will see the battery at the front right. The FUSE BOX is just beyond the battery. The top of the fuse box has a panel which identifies each fuse. The EFI fuse is the MIDDLE FUSE, closet to the right fender.
Fuse diagram for 1996 Toyota 4 runner is available for viewing and download on fitdownload website. The circuit diagram shows the wiring and fuse locations in detail.
which fuse is the heater/AC fan fuse
The 4 door fuse panel is under the dash on the drivers side The 2 door fuse panel is in the drivers end of the dash , the fuse panel cover is visible with the drivers door open
What should the fuel pressure be for a 1993 toyota 4 runner?