It's on the right side of your engine, directly left of the air filter. See the related link.
On a 2004 Kia Optima with a 4-cylinder engine, the ignition failure sensor is typically located near the ignition coil or within the distributor assembly, depending on the specific engine configuration. It may be mounted directly on the engine or attached to the ignition system components. For precise location and access, referring to the vehicle's service manual is recommended.
The ignition failure sensor in an 01 Stratus RT is located above the condenser. It is near the ignition coil. ?æ
Transmission sensor problems on a 2004 Kia Optima will cause incorrect shifting, poor performance, and hesitation. Sensor failure can be narrowed down by connecting an OBDII code reader to the vehicle's computer.
Ignition lock cylinder
On a 2005 Kia Optima, the bank 2 sensor 1 oxygen sensor is located on the exhaust system, specifically on the exhaust manifold or just after it. Bank 2 refers to the side of the engine opposite to bank 1, which is typically where cylinder 1 is located. For the 4-cylinder engine, this means bank 2 is on the opposite side of the engine, while for the V6, it will be on the side that does not contain the first cylinder.
On a 2004 Kia Optima, the crankshaft sensor is located on the front of the transmission case. The sensor is adjacent to the flywheel.
where is the output shaft speed sensor located on a 2001 Kia Optima?
I need to know how much will a throttle sensor cost to fix a kia optima
That sensor is located on the cylinder head, right next to where the ignition coils are bolted to the engine.
The 03 Saturn Vue does not use a stand alone camshaft sensor. The system uses the ignition system as a sensor, tapping into the number one and four cylinder firing systems.
Behind the exhaust manifold.
Chevy did not use a crankshaft sensor in 1995.If it won't fire then I would check the ignition module in the distributor and more then likey replace it. Also check the ignition coil and WIRE / coil wire.