These sensors are located on the front of the transmission. (http://dnlfiles.bf2guru.com/Ebay/Transmissionstore/604%20trans.jpg )link shows a picture of this trans. One sensor is located directly under the trans cooler lines. and the other horizontal to that towards the end of the trans
passenger side
drivers side just in front of transfer case the sensor is yellow the only one in that area.
Yes.Yes.
Its located on the firewall... it is just sticking out, it has a 3 wire connection to it as well as a vaccum line coming from it.
The cam sensor on the 4 cylinder is on the end of the head. On a 6 cylinder it is on the front timing cover.
The coolant temperature sensor on a 2005 Dodge Neon is located on the cylinder head. It is close to the camshaft position sensor.
The cam sensor is under the front of the passenger side cylinder head.
The output speed sensor on the transmission is also the vehicle speed sensor. The output sensor is the two wire sensor on the front of the trans all the way to the driver side.
Yes, should be on side of intake.
It is screwed into the exhaust manifold on the back of the engine.
The cam sensor on a Dodge 4.7L is under the front outside of the passenger side cylinder head.
The output speed sensor is on the drivers side of the transmission and to the rear. The input sensor and output sensor are beside each other but have different connector types. common symptoms of a failed output sensor are: Speedometer stops working or is intermittent, transmission is stuck in second gear ( limp mode ) .