In many cases for this generation, your top cover has a total of 12 screws with a torx head on them. Remove those and you will see the sensor to the right. Replace and re-install.
Try replacing the map sensor
To replace the MAP sensor in a 1998 Cadillac Eldorado with a Northstar engine, first, ensure the engine is off and cool. Locate the MAP sensor, which is typically found on the intake manifold; disconnect the electrical connector and remove the mounting screws. Replace the old sensor with the new one, secure it with screws, and reconnect the electrical connector. Finally, start the engine to ensure the sensor is functioning properly.
Where is the MAP sensor located on a 2003 Cadillac DevilleRead more: [[Q/Where is the MAP sensor located on a 2003 Cadillac Deville#ixzz2R1XaEPL2|http://wiki.answers.com/Q/Where_is_the_MAP_sensor_located_on_a_2003_Cadillac_Deville#ixzz2R1XaEPL2]]
MAP Sensor on a 1994 Cougar is located on the firewall. Has a vacuum hose coming from it and an electrical connection.
The 1994 Ford Ranger pickup truck map sensor is located behind the dashboard, on the passenger side of the passenger compartment. The map sensor is contained in a dust free box.
Intermittant map sensor
where is a map sensor loction for 1994 ponatic bonneville?
The map sensor is located on the intake manifold of a 1994 Ford. It could also be located on the plenum by the throttle body.
No, It has to have it.
The 1994 S10 uses a MAP sensor, not a MAF sensor. We need to know size engine you have in that S10.
on the fire wall
The 850 does not use a MAP sensor. It uses a MAF sensor that is located and attached to the air filter housing lid