on a 1.9 engine it is located at the front middle of the vehicle under the bonnet. 32mm socket to loosen it. If its a 2.5 engine it is underneath a turbo pipe at the front/left side of the bonnet. put a light down and you will see the 32mm nut.
V
You can usually buy an oil filter wrench from any auto parts store's that would fit your oil filter
The st3600 oil filter fits the ford v-6 4.2 liter
You need to drop the exhaust to reach the oil filter
A Briggs and Stratton 18 HP V-Twin engine has an oil capacity of 1.75 quarts when the oil filter is also changed. If the oil filter is left on, it will require 1.5 quarts.
4.3 V-6
list model # ph30 fram oil filter fits
On the v-6 the oil filter is on the top of the motor. It is in a plastic cartridge. On the 4 cyl it is on the underside of the motor.
the oil pressure swith should be down never the oil filter it screws into the neck that the oil filter is attached in a 4.3lt v-6 that is
On the V-6,Immediately in front of the oil pan. Probably the easiest oil filter to get at on any car I've ever owned.
Remove the oil pan plug. Allow the motor oil to drain out. Replace the oil pan plug. Remove the oil filter, by turning it to the left. Fill the oil filter with oil. Put the new filter on by turning it to the right. Fill the engine was motor oil.
Oil recommended is 10W30 Oil Filter is HONDA OIL FILTER 15400-PFB-014 / 004 You can find parts online - the engine in that model is a V twin 520cc: Honda GCV520