On a 2004 Yamaha 350 Bruin, the oil plug is typically located on the right side of the engine, near the bottom. It is usually a hex or bolt type plug that allows you to drain the oil. To locate it easily, consult your owner's manual for a diagram or detailed instructions specific to your model. Always ensure the engine is cool before attempting to remove the oil plug.
The oil plug is under the oil filter ...straight bolt ..14 mill..
you will need to pull the drain plug, then take off the oil filter, then replace the oil plug and the new filter, finally put your new oil in.
its 2.5 quarts.
I have a Yamaha 350 big bear, and differential drain plug is on the bottom of the differential. Just remove the plug and let it drain, put the plug back in and fill it back up... i use just regular gear oil
The oil capacity for a 2004 Yamaha Bruin 350 is approximately 2.0 quarts (or about 1.9 liters) when the oil filter is also replaced. If you are only changing the oil without replacing the filter, the capacity is around 1.8 quarts (or about 1.7 liters). Always refer to the owner's manual for precise specifications and maintenance guidelines.
The Yamaha ATV Bruin YFM 350 A is typically equipped with a manual transmission and is designed for more experienced riders who prefer greater control. In contrast, the Yamaha Bruin YFM 350 BA features an automatic transmission, making it more user-friendly for beginners or those who prefer a simpler riding experience. Both models share similar engine specifications and performance characteristics, but their transmission systems cater to different riding preferences.
Manual says align with the first T
Poor upkeep try cleanig the airfilter if that doesent work try cleaning out the carburetor I have a yamaha 350 bruin I had the same problem
The 2006 Yamaha Bruin 350 has the same bolt pattern for years 04-06. Front tire size 25x8x12 Rear tire size 25x01x12 Rim size 12x7 Bolt Pattern 4x110
behind the left front tire tucked inside the frame
On the Yamaha 350 Bruin, the oil plug, or oil drain plug, is typically located on the bottom of the engine case. You may need to look underneath the ATV to find it, as it's usually a hex-shaped bolt. Make sure to consult your owner's manual for the exact location and specifications, as they can vary slightly depending on the model year. Always ensure the ATV is on a flat surface and secured before attempting any maintenance.
left frame rail below engine at front behind lower control arm