look under the dash on the passenger side, its on the right kick panel.
I just bought a 2000 ford excursion,where would i look for the factory entry code?
To reset the keyless entry on a 2000 Ford Excursion, first, ensure that you have the factory key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press the "Unlock" button on the driver's side door panel and hold it while you turn the ignition off and then back to "On" three times. Release the "Unlock" button, and the system should beep to confirm the reset. You can then program your key fob by pressing any button to complete the process.
There is no factory reset code for keyless entry on a 2000 Ford Excursion. To find the code, locate the module underneath the dashboard. You may need a borescope to look at the number.
where is the fuel reset button on a 1994 ford ranger Driver side trunk. behind plastic covering
i have a 2000 xls and the reset is above the speedometer
To reset the fuel pump on a 2000 Ford Excursion, locate the inertia switch, which is typically found in the passenger compartment, near the driver's side kick panel or in the trunk area. Press the red button on the switch to reset it. If the fuel pump is still not functioning, ensure that the vehicle's battery is charged and check for any blown fuses related to the fuel system. If issues persist, further diagnostics may be needed.
For a 2000 Ford Excursion : ( 166.6 litres / 44.0 U.S. gallons )
The reset button for the fuel pump is located in the right front passenger footwell , by the kick panel
( The 2000 ) was the first model year of the Ford Excursion
A 2000 Ford Excursion would be ( 134a ) in the air conditioning system
Chevrolet does not use a "reset" button for the fuel pump on their vehicles. That is a Ford thing.
The instructions are in the owners handbook, they are a little convoluted but if you follow them to the letter they work just fine