The fuel pump reset switch for a 1998 Oldsmobile Bravada is typically located in the rear of the vehicle, near the fuel tank. It can usually be found on the driver's side, attached to the frame or on the side of the vehicle's body. The switch may be labeled as the fuel pump reset or inertia switch, and it can be reset by pressing it down firmly after an incident like a collision or fuel pump failure. If you're having trouble locating it, consulting the owner's manual can provide specific guidance for your model.
is there a fuel cut off switch in an oldsmobile bravada
There is none. Gm vehicles are not equipped with an inertia switch.
There is no fuel reset switch. There is a fuel pump fuse within the fuse box and there is a relay inside of the electrical panel in the engine compartment, but there is no reset switch.
Simple answer is "no". It stopped being mandatory around '89 or '91. Therefore, GM cars/trucks don't have them, but Ford vehicles still have them.
Push both buttons at the same time, it will reset to zero.
Dodge does not use inertia/reset switches.
Plymouth does not use inertia/reset switches.
Dodge does not use inertia/reset switches.
At this time only Ford uses an inertia switch. Also called a fuel pump reset switch. But they have a pump relay and a fuse.
GM vehicles are not equipped with a fuel pump inertia switch.
GM vehicles do not have a fuel pump inertia switch.
To reset the fuel pump on a 1998 Ford F-150, locate the fuel pump reset switch, also known as the inertia switch. This switch is typically found in the passenger side footwell, near the kick panel. Press the red button on the switch to reset it. After resetting, turn the ignition key to the "On" position for a few seconds to allow the fuel pump to prime before starting the engine.