0
What else can I help you with?
Daewoo Lanos 2000?
we need the engine specifications on the daewoo lanos 1.5 liters
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
Why Daewoo lanos have no spark?
i have a 2000 1.5 auto lanos no spark, good plugs new crank sensor new coil replacement ecu any ideas ?
Radio code for a 2000 Daewoo Lanos?
4524
Where is the ecm pcm located on a 2000 Daewoo lanos?
The ecm is located under the front passenger seat on my wife's 2000 Daewoo Lanos. This is an American version of the car.
How do you check the transmission fluid on a Daewoo lanos 2000?
To check the transmission fluid on a Daewoo Lanos 2000 you have to get to the back side of the engine from underneath. The way we did it was to put the car on a lift.
Does the computer ground the ingectors on a 2000 Daewoo Lanos?
yes
What is the spark plug gap for a 2000 Daewoo Lanos?
44
What is the location of the crankshaft postition sensor for 2000 Daewoo Lanos?
Left hand side of engine block. Cable connector is at the frame bracket. Sensor picks up info. from the flywheel.
How do you change a knock sensor in a Daewoo Lanos 2000?
To change the knock sensor in a 2000 Daewoo Lanos, first, disconnect the battery to ensure safety. Locate the knock sensor, which is typically found on the engine block or cylinder head, and remove the electrical connector. Unscrew the old sensor using a socket wrench, then install the new sensor by reversing the process, making sure to torque it to the manufacturer's specifications. Finally, reconnect the battery and check for any engine codes or issues.
How many quarts of oil in 2000 Daewoo Lanos?
4 quarts is what I use.
Why would the temperature Gauge not work in a 2000 Daewoo Lanos?
The temperature gauge in a 2000 Daewoo Lanos may not work due to a faulty temperature sensor, which provides readings to the gauge. Additionally, there could be issues with the wiring or connections between the sensor and the gauge, leading to a lack of signal. A blown fuse or a malfunctioning gauge itself could also be potential causes. Checking these components systematically can help identify the issue.
