To the left of your left foot, above the pull lever where you open your trunk. For the Flasher relay, you'll have to go behind the steering wheel column and take off that panel. Above the fuse box & to the left of the steering wheel there's a hollow rectangular box looking thing that's big enough to hold cigarettes. The hollow box has a lightbulb knob to the left of it. You can pry out the hollow box with a screwdriver to access the relay.
pry out the box
[ box ] (steering wheel)
how to replace the flasher relay on a hyundai accent 1999
A 1999 Hyundai Accent does not have a clutch adjustment. The clutch pedal however, can be adjusted to a different height.
How do i check the transmission fluid in a manual 99 Hyundai Accent?
A 1999 Hyundai Accent tire pressure would normally be 32 pis. The tire has the rating stamped into the sidewall.
In a 1999 Hyundai Elantra, the turn signal relay is typically located in the fuse box, which is situated under the dashboard on the driver's side. You may need to remove the cover of the fuse box to access the relay, which is usually labeled for identification. If you're having trouble locating it, consulting the owner's manual can provide specific details and diagrams for your vehicle.
It is important to maintain the fluid levels of a car with the proper fluid types. A 1999 Hyundai Accent uses 5w30 engine oil.
You can find the wiring diagram for a Hyundai Accent 1999 at various auto part stores. You can also check the vehicle's owner's manual.
On a 1999 Hyundai Accent, the fuel injector fuse is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by removing the cover and checking the diagram on the inside for the specific fuse related to the fuel injectors. Additionally, the fuel injector relay, if applicable, is usually found in the engine compartment relay box. Always consult the owner's manual for the precise location and specifications.
NO, THE ARE BOTH DIFFERENT MODELS OF CARS NO NOT DIFFERENT MODELS, DIFFERENT GENERATION!!!!!!!!!!!!!!!!!!!!!!!!!!
No, they will not fit the exhaust port holes are different.
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
its right in front of the radiator.