The ECM on the Vandura 2500 is under the Driver's seat.
In a 1990 GMC Vandura 2500, the fuel pump relay is typically located in the fuse box under the dashboard on the driver's side. It may also be found in the engine compartment near the battery, depending on the specific wiring and options of the vehicle. Always refer to the vehicle's service manual for the exact location and diagram.
The transmission relay on a GMC Vandura 2500 is typically located in the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. The exact position may vary slightly depending on the model year, so it's advisable to consult the owner's manual for the specific relay diagram. Additionally, it may be helpful to check for any labeling on the fuse box cover.
There are to sizes 110"and 125".
3254
.all I can say is my '92 2500 vandura has a 350 in and it does the job...don't know if all of 'em are the same size or not dt
4L80E is in most vanduras of one ton 2500 and below is 4L60E
My 93' vandura has a 5.7 liter 350cubic inch engine.
Yes
Ebay =)
It most likely has hook end wiper arms. Purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
I have a 3500 and mind is under the driver seat