In a Chevy Cavalier, you put the brake fluid in the brake fluid reservoir located atop the master cylinder. You can find this under the hood, on the drivers side, near the back firewall on top.
The brake fluid on a 2003 Avalanche goes into the fluid reservoir. The reservoir should be bolted onto the drivers side of the firewall.
yes
how to i put it at on the Chevy cavalier 2.2 l
Master cylinder. Mounted on the firewall, driver's side.
98 Chevy cavalierIt might be a stick shift
For a 2003 Chevy Tracker, you should use DOT 3 brake fluid, which is a common type suitable for most vehicles. Make sure to check the owner's manual for specific recommendations and ensure that the brake fluid is clean and meets the required specifications. Always avoid mixing different types of brake fluid, as it can compromise braking performance.
You put the brake fluid inside the brake master cylinder
you put the brake fluid inside the master cylinder
To put brake fluid in a 1997 Ford Explorer, you must locate the brake fluid reservoir. Once you locate it, unscrew the cap, and replenish the brake fluid.
best answer is take it to a brake shop it's not something that should put your life on the line for. but if you have to do it you will need a Chevy brake tool or an Allen wrench to remove the calipers then its simple to switch out pads. drums again I recomend a shop.
in the brake fluid bottle. >:D
The brake fluid reservoir