There are numerous battery fuses in both the rear and front fuse boxes.
There are numerous battery fuses in both the rear and front fuse boxes.
425
For a stock radio installation in a Dodge Magnum, typically, the yellow power wire is used for constant power (battery) while the red wire is used for the ignition power (accessory). Always refer to the vehicle's wiring diagram for specific color codes, as variations can exist depending on the model year. It's also wise to use a multimeter to confirm connections before finalizing the installation.
235 hp
To reset the airbag light on a 2005 Dodge Magnum, first ensure that there are no active issues with the airbag system. Disconnect the negative battery terminal and wait for about 10 minutes to allow any residual power to dissipate. Reconnect the battery and start the vehicle; the airbag light should reset. If it remains on, you may need to use an OBD-II scanner to clear any stored error codes.
245-250
The fan relay on a 2006 Dodge Magnum is typically located in the power distribution center (PDC), which is found in the engine compartment. To access it, open the hood and look for the rectangular black box near the battery. Inside the PDC, you will find the relay labeled for the cooling fan. Always consult the vehicle's owner's manual for specific diagrams and information.
190 np 190 ft/lbs torque
My '97 V-6 Magnum (3.9) is rated at 175 hp.
The fuel pump relay for a 2005 Dodge Magnum is located in the Integrated Power Module (IPM), which is situated in the engine compartment near the battery. To access it, you need to open the IPM cover, where you'll find the relay labeled for the fuel pump. It's advisable to consult the owner's manual or a repair guide for the exact relay position and specifications.
yeah it have 2
Trouble code P0944 means: Hydraulic pressure unit loss of power
The power of the engine and the maximum speed of the 1978 Dodge Magnum are 150 hp (112 kW) and 190 mph (310 km/h) respectively.