Indead, It is not easy and clear to find the fuse
V50 1.6D , 2007: the fuse is on the 3th place on the upper row, beginning on the left side. (the fuse compartiment on the pesenger' side
When looking at a fuse box it is important to know what each fuse powers. The fuse that powers the 12V cigarette lighter is the one marked as an accessory in the fuse box lid.
No, the cigarette lighter fuse is not large enough to handle below nor is the wiring.
21.08–21.23 mm
The fuse that controls the 12V outlets in the front of a 2004 Beetle will be coded with a title that resembles the words, cigarette lighter. They might also be coded as 12v outlet.
When your cigarette lighter fuse is good and there is voltage measured between the fuse's load side to ground (To check this, use a dc voltmeter or a 12v automotive lamp and an automotive lamp socket. Connect one wire to the fuse and the other wire to the chassis of the vehicle the lamp should glow if voltage is present on the fuse terminal.), check the wire between the fuse and cigarette lighter. This wire should be without cut and when the wire is good then check the connector on the cigarette lighter socket for loose connection or corrosion. One more thing is that, make sure that your cigarette lighter fits the cigarette lighter socket because not all cigarette lighters will work on some cigarette lighter sockets.
In a W-reg Volkswagen Polo, the fuse for the cigarette lighter is typically located in the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. You can refer to the owner's manual for a specific fuse diagram, but it is commonly labeled as "cigarette lighter" or “12V socket.” If the lighter is not functioning, check this fuse first to see if it needs to be replaced.
12v DC
It's the fuse for the 12V power point located just below the cigarette lighter.
The last fuse on the right it should be a red one 10 amp pull it out and put a new one In Hut
use the cigarette lighter as as a socket
Yes the new style of 12v outlet has replaced the conventional cigarette lighter.
Just pull 12V from the battery or the fuse panel. Make sure you put the appropriate sized fuse inline with you cigarette lighter. It will protect against fires. Good luck.