You remove no pulleys. Just loosen the belt and then remove the alternator.
no remove the horn alternator will come through side of subframe
To change the alternator on a Vauxhall Astra 1.6, first disconnect the battery to ensure safety. Remove the drive belt by loosening the tensioner, then detach the electrical connections from the alternator. Unscrew the mounting bolts to take out the old alternator, and install the new one by reversing the steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.
To remove the crankshaft pulley on an Opel Astra Ecotec, first, ensure the engine is cool and disconnect the battery. Use a socket to remove the bolt securing the pulley, but you may need to hold the crankshaft in place with a crankshaft holding tool or a flywheel lock. Once the bolt is removed, gently pull the pulley off the crankshaft. If it's stuck, using a harmonic balancer puller can help safely extract it without damage.
how do you fit an alternator to a 1.7dcti astravan
belt diagam for 1.6 v astra
To fit the alternator belt on a 2002 Astra 1.7 diesel, first ensure the engine is off and cool. Locate the tensioner pulley and use a suitable tool to relieve tension on the belt. Remove the old belt and route the new belt around the pulleys according to the belt diagram, which can usually be found in the engine bay or in the owner's manual. Finally, release the tensioner to secure the belt in place and check for proper alignment before starting the engine.
the answer is no you only have to remove the car horns and the large under tray to make way for removal.
If the alternator was recently replaced on an Astra DTI 1.7, then there is a good chance that the power steering pump is not working properly because the serpentine belt is too loose or too tight. Check the belt and either tighten or loosen the tension pulley.
how do i remove back door card on avauxhall astra 2009
To change the fan belt on an Opel Astra, first ensure the engine is off and cool. Locate the belt routing diagram, usually found on a sticker in the engine bay. Loosen the tensioner pulley using a wrench, then remove the old belt from the pulleys. Finally, install the new belt according to the routing diagram and re-tighten the tensioner before starting the engine to check for proper alignment.
how do I change cigarette liter for vauxall astra sport year 2000
the voltage regulator is inside the alternator