0
You won't necessarily blow any seal. You will however destroy the engine if you overfill it enough as to allow the crankshaft to make contact with the oil. This will create a froth of oil mixed with air. And as you probably can guess air is a very poor lubricant. This mixture will cause engine wear and overheating.
What else can I help you with?
Why is Seal's face scarred for the full story?
Seal's scars result from a motorcycle accident.
How do you change a transmission seal on a Harley Davidson motorcycle?
It depends on which seal you are talking about, mainshaft or shifter.
Who would win in a fight seal or turtle?
A seal would win becaus a seal is a much larger animal and has teeth where as a turtle is a lot smaller and does not have as much power but a turtle can hide in its shell.
How blow-by occur in engine?
Blow-by is usually caused by worn piston rings that do not seal properly during the combustion stroke.
Why would a 1998 Toyota Camry keep blowing the front cam shaft seal?
It's probably "blow-by", a condition where the exhaust gasses blow past collapsed rings. If you haven't kept the oil properly changed, you may have built up carbon around the rings and they may not be able to make a good seal. Once that happens, you get blow-by and you loose seals and have other problems.
You are leaking fluid from fork of motorcycle?
You probably have a damaged fork oil seal, which needs replacing.
How much to fix oil seal on 1990 cutlass calais?
The price would depend on wheather it is a valve cover seal, oil pan seal, or a head gasket.
What's the size of a Honda steed 400cc motorcycle fork oil seal?
39x51x8/10 mm
How many 30 lbs raccoon would weigh as much as a 210 lbs harp seal?
To find the answer divide 210lbs by 30lbs.The answer is 7 Raccoons would weigh as much as 1 x 210lb Harp Seal.
Will a broken choke pin cause engine blow by?
Yes and No. Blow by is caused by an inproper seal between the compresion ring's and cylinder's. And yes a broken choke pin can result in flooding the cylinder's with fuel which will result in scoring of the cylinder's and a poor seal. Did this help?
Why Chevy 350 blows oil out front seal?
Possible bad seal or scarred balancer, or possibly pcv system not working. Remove the oil cap, and with the engine running, put your hand over the hole with the engine running. There shouldn't be much pressure, no pressure, in fact, just air moving in and out rapidly. If you're getting a buildup of much crankcase pressure, it can damage a seal and blow oil out.
Can you use silicone to seal a gasket on a starter cover for a motorcycle?
You can make a paper gasket out of a cereal box that would be better than using Silicone -but if you can't figure that out use very little silicone.
