It can be either the passing of the oil through a filter system, or the passing of the oil through a magnetic system, or a combination of both.
that depends on the makeup of the small pieces of metal. Ferrous metals can be removed by using a magnetic oil drain plug. A magnetic oil drain plug can be difficult to find, but they will trap ferrous metal.
One method to separate a small metal piece from oil is to use a magnet. By placing a strong magnet near the oil, the metal piece should be attracted to the magnet and can be easily removed. Alternatively, you can use a sieve or a filter to strain the oil and catch the metal piece.
scrap metal yard, small engine repair or similar
There is a piece of metal on the connecting rod that splashes the oil around.
There should be a small metal plaque on the dashboard to the left of the steering column.
it is in the engine compartment on the right side, a small metal filter
With a magnet.
Yes, a magnet can be used to separate small pieces of ferromagnetic metal from a mixture of metal. The magnet will attract the ferromagnetic metal pieces, allowing them to be easily separated from the rest of the mixture.
Metal can be separated from ore through a process called smelting, where the ore is heated to high temperatures, causing the metal to melt and separate from the impurities in the ore. Chemical processes such as leaching and electrolysis can also be used to separate metal from ore by dissolving the metal and then extracting it.
drill small hole in old seal use sheet metal screw drill small hole in old seal use sheet metal screw
Gutenburg first invented printing that used separate metal letters.
You bet--------- hold on your butt when the pedal hits the metal.