The rotary engine has a total of 4 spark plugs, the top 2 fire first with the front housing fire first.
Hope this helps.
Denso W22EBR should be the correct OEM plug for your Mazda RX7 but to make sure have the Auto Parts store look it up for you just to double check.
the proper plugs come pre-gapped. you do not need to adjust them.
You can either take out a spark plug on each rotor and spin it over or you can pull your fuel injection fuse and spin it over.
mazda doesnt rx7 anymore :(
you have a blown water seal. Rebuild time..
On a 1988 Mazda RX-7 convertible, the spark plug wire configuration typically follows the firing order of the engine, which is 1-2-3. The spark plug number that goes to the top is usually the one corresponding to the first cylinder, which is positioned at the front of the engine. Make sure to consult the vehicle's service manual for the exact routing and specifications to ensure proper installation.
The Mazda Rx7 has the Wankel Rotary Engine in it
4 plugs 2 leading 2 trailing.
4 plugs. 2 are leading and 2 are trailing.
Mazda didn't make the RX7 in 1974.
Yes, there is a transmission in a 1990 Mazda RX7 convertible.
The Mazda RX7 was made discontinued in 2002. Mazda replaced the RX7 with the RX8 in 2003