Center terminal is connected to the positive from the battery. Outside is connected to ground (-).
To connect a wire to make a bulb light up, you need to complete an electric circuit. This involves connecting one end of the wire to the positive terminal of a power source (such as a battery) and the other end to the bulb's positive terminal. Then, connect the negative terminal of the battery to the negative terminal of the bulb to complete the circuit and allow electricity to flow, causing the bulb to light up.
If it is a 1.5 volt bulb you can connect it through a series circuit directly to your battery. If the bulb is not made to run on 1.5 volts and needs another voltage, it may not light up!
To create a simple light bulb circuit, you will need a power source (such as a battery), a light bulb, and wires to connect them. Connect one end of the wire to the positive terminal of the battery, and the other end to one terminal of the light bulb. Then, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to use the correct voltage for the light bulb to avoid damaging it.
I am going to assume you meant Three wires, Battery and Light Bulb. (punctuation and plurals are important) Hook the light to one post of the battery Hooked from the light to the item being tested (use the other light connection, not the one connected to the battery) connect the other end of the test item to the unused terminal on the battery. Light comes on means it conducts electricity No Light, it does not.
To create a simple light circuit, you will need a power source (such as a battery), a light bulb, and wires. Connect one end of the wire to the positive terminal of the battery, then connect the other end of the wire to one terminal of the light bulb. Next, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to handle the components carefully and follow safety precautions when working with electricity.
This answer website does not have the ability to draw diagrams. From the positive side of the battery connect it to one side of the switch. From the other side of the switch connect it to the centre terminal of the first bulb's socket and then continue the wire to the centre terminal of the second bulb's socket. From the negative side of the battery, connect a wire to the shell terminal of the first bulb's socket and then continue the wire to the shell terminal of the second bulb's socket. When you turn the switch on the both lamps will glow.
The switch is not needed.
because when you connect the both end of the battery to the same battery terminal, it is called a parallel connection, therefore when it's parallel connection the ampere rating of the battery increases, so it's enough that would able to light up the bulb,. .hope my answer would help,. hehehe^_^
Connect the terminal to the body of the car first, i.e. the nagative terminal, then connect the positive terminal.
You connect the batteries in series Red charger lead to one red battery terminal, then the black battery terminal of that battery to the red battery terminal of the second battery. Then black battery terminal of the second battery to the black lead of the charger.
You connect the positive terminal first.
When jump-starting a car battery, you should connect the positive terminal first.